100% Made in the USA

Toll free: 844-920-9043
  630-231-0419

Eagle 3000 Heat Gun

Eagle 3000
Specifications
  • Temperature: Ambient - 1200°F (Ambient - 650°C)
  • Air Flow: 6-8 CFM (170-230 l/min.)
  • Wattage: 1600 watts @ 120/220 VAC
  • Voltage: 120 or 220 VAC, 50/60 Hz.
  • Size: 12.6" x 3.7" (320 x 95mm)
  • Weight w/o Case: 2.4 pounds (1.1 kg)
  • Shipping Weight: 4.4 pounds (1.91 kg), Double insulated
  • Options & Accessories:
    • 1 ½” (40mm) Nozzle (included with unit)
    • ¾” (20mm) Nozzle
    • 3/16” (5mm) inside diameter round nozzle
    • ¾” (20mm) angled nozzle

Compact and lightweight, the EAGLE 3000 simplifies seam bonding in corners, around equipment protrusions, and in other tight, hard-to-weld areas. The unit fits comfortably in your hand and is available with a variety of nozzle tips to weld virtually any type of material. The EAGLE 3000 is available for either 110 VAC or 220/240 VAC operation; models are double-insulated.

  • EAGLE 3000 plug-in The EAGLE 3000's plug-in heating element can be replaced in just minutes without special tools . . . right in the field!
  • eagle 3000 control Recessed temperature control knob, booted power switch, and screened air inlet protect the EAGLE 3000 against dirt, damage, and debris. Plus all controls are readily accessible for quick adjustment.
  • Eagle 3000 Replacement Replacing a heating element is a simple pull-out, plug-in operation.
  • Eagle 2000 Nozzle Tips Stainless steel nozzle tips and single-arm seam roller simplify welds around equipment protrusions and in other tight spaces.

Features

  • Electronic Temperature Control permits precise temperature adjustments from ambient to 1200°F (650°C), independent of voltage or nozzle variations.
  • Plug-in Heating Element is easily replaced in the field.
  • Heavy-Duty Fan Motor with 1800 hour carbon brush life.
  • Stainless Steel Nozzle pushes on easily, can be replaced in seconds. Available in 1-1/2" (40mm) wide, 3/4" (20mm) wide, and 3/16" (5mm) diameter pencil tip.
  • Screened Air Inlet prevents dirt, dust and debris from entering and damaging motor and heating element.
  • Heavy-Duty Strain Relief protects electric cord from pullout.
  • Environmentally Protected On/Off Switch with rubber boot to keep out dirt, dust, and moisture.
  • Built-in Over-Temperature Protection protects heating element and electronics from thermal runaway.
  • Adjustable Air-Flow Control permits continuous adjustment of air flow 7-9 CFM (200-250 litres/min.).
  • Accessories include heating elements and a variety of nozzles.